This template is used to get basic status of AHU. Following fields are displayed for this template:
|
Field |
Description |
|---|---|
|
Bacnet Device |
Select the BACnet device to filter out the BACnet objects during configuration. This selection does not get saved. |
|
Temperature |
Select the monitoring object to read the return air temperature. |
|
Humidity |
Select the monitoring object to read the return air relative humidity. |
|
Supply Air Temperature Setpoint |
Select the monitoring object for supply air temperature setpoint. |
|
Return Air Temperature Setpoint |
Select the monitoring object for reading the return air temperature setpoint. |
|
CFM |
Select the monitoring object to get the CFM reading. |
|
Runtime |
Select the monitoring object to get AHU runtime. |
|
Supply Temperature |
Select the monitoring object for the actual supply temperature. |
|
On/Off State |
Select the monitoring object to get current On/Off status. |
|
Pre Filter |
Select the monitoring object to get pre-filter status. |
|
Fine Filter |
Select the monitoring object to get fine filter status. |
|
Duct Static Pressure |
Select the monitoring object to get duct static pressure reading. |
|
Duct Static Pressure SetPoint |
Select the monitoring object to get the duct static pressure setpoint. |
|
Chilled Water Inlet Temperature |
Select the monitoring object to get the temperature of the chilled water entering the AHU. |
|
Chilled Water Outlet Temperature |
Select the monitoring object to get the temperature of the chilled water exiting the AHU. |
|
Return Air Co2 |
Select the monitoring object to get the return air Co2 level. |
