Skip to content

Web Application - Admin User Manuals

Configuring Breaker Status

2 min readUpdated

In this section, you will learn how to:

You can create templates to define the statuses of the circuit breakers as On, Off, Tripped, and so on, based on the operational conditions of the circuit. You can associate a value for each of these statuses. For example, 1 for On, 0 for Off, and so on. Defining these status templates ensures accurate communication between systems and provides a structured way to monitor the circuit breakers' operational health. This setup helps in troubleshooting and identifying issues quickly by mapping numerical values to specific events or conditions.

Adding a Breaker Status

  1. In the Main Menu, under the ADMIN OPTIONS, in the Misc Config subsection, click Status.
    ‎The Status page is displayed with the UPS Status tab open by default showing a list of status templates, if any.
  2. Click the Breaker Status tab.
    ‎A list of status templates for the circuit breaker, if any, are displayed.
  3. Click Add Breaker Status.
  4. Enter or select the required field information.
    Field Description

    Name*

    Enter the name of the status template.

    Not Older Than*

    Select the maximum duration beyond which the unit’s last reported state becomes invalid.

    For example, if you set this duration to 15 mins, any state older than 15 minutes will be considered invalid, and the unit will display the default state.

    ON Value

    Enter a value to represent the ON status of the breaker.

    OFF Value

    Enter a value to represent the OFF status of the breaker.

    Trip Value

    Enter a value to represent the tripped status of the breaker.

    Normal Value

    Enter a value to represent the normal status of the breaker.

  5. Click Save.

Editing a Breaker Status

  1. In the Main Menu, under the ADMIN OPTIONS, in the Misc Config subsection, click Status.
    ‎The Status page is displayed with the UPS Status tab open by default showing a list of status templates, if any.
  2. Click the Breaker Status tab.
    ‎A list of status templates for the circuit breaker are displayed.
  3. Under the Action column, click the Edit icon icon.
  4. Edit the required fields. For information on fields descriptions, refer Adding a Breaker Status.
  5. Click Save.
    ‎The breaker status is updated.
Was this page helpful?