Skip to content

Web Application - Admin User Manuals

Monitoring UPS Systems

2 min readUpdated

In this section, you will learn how to:

A UPS or an Uninterruptible Power Supply system provides backup power during outages, ensuring continuous operation for critical equipment like computers and servers. It protects against power fluctuations, surges, and interruptions, safeguarding data integrity and hardware.

By monitoring UPS systems, you can track battery health, load levels, and operational status. This real-time data can alert you against potential issues, allowing for proactive maintenance and timely replacements.

Creating a UPS

  1. In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click UPS.
    ‎The UPS page is displayed with a list of onboarded UPS, if any.
  2. Click Create UPS.
  3. Enter or select the required field information.
    Field Description

    Name*

    Enter the name of the UPS system.

    Model*

    Enter the model of the UPS system.

    Select UPS Point*

    Select the corresponding utility point configured during the utility device setup.

    Note: For more information, refer to Configuring UPS Status.

    Select Data Sync Config

    Select the frequency at which data sync should be configured.

    Note: For more information, refer to Configuring Data Sync.

    Description

    Enter a description for the UPS system.

    Active

    Select this checkbox to activate the onboarded UPS system.

  4. Click Save.
    ‎The UPS system is onboarded.

Editing a UPS

  1. In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click UPS.
    ‎The UPS page is displayed with a list of onboarded UPS, if any.
  2. Under the Action column of the required UPS, click Edit icon.
  3. Edit the required information. ‎Refer to Creating a UPS for field descriptions, if needed.
  4. Click Save.

Filtering UPS

  1. In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click UPS.
    ‎The UPS page is displayed with a list of onboarded UPS, if any.
  2. To filter UPS, enter the Name of the UPS.
  3. To reset the filter, click Reset.
Was this page helpful?