BACnet or Building Automation and Control network is a communication protocol that allows multiple building control devices and systems to integrate and communicate with each other. It is designed to standardize the way devices within building automation systems communicate with each other.
The protocol is widely used for controlling and monitoring systems such as HVAC (Heating, Ventilation, and Air Conditioning), lighting, access control, fire detection, and other building systems. These systems, also known as devices or servers, can have multiple endpoints or objects, each capturing specific data about the system, such as the on/off status, voltage, current and more.
When you add a Bacnet utility, additional fields are displayed that allow you to:
- Add a Bacnet node
- Add devices manually
- Discover devices
- Edit device information
- Create duplicate devices
- Add objects manually
- Fetch objects
- Download and upload Bacnet device reports
Adding a Bacnet Node
Bacnet node is Bluecoin’s Bacnet device that is onboarded and integrated with this utility. This integration ensures that Bluecoin’s Bacnet device is able to communicate with other Bacnet devices in the network to gather data.
- On the Utility Setup page, after selecting and saving the Bacnet utility, click Add Bacnet Node.
The Add/Edit Bacnet Node pop-up is displayed. - Enter the Bacnet Node Name*.
- Enter the Bacnet Node UID*.
- Click Save.
The Bacnet node is added and is displayed on the Device Setup page.
Adding Devices Manually
After creating a BACnet node, you can proceed to add devices in the network to capture data points. This involves identifying and integrating various devices into the system, allowing them to communicate and share data within the BACnet network seamlessly.
- On the Utility Setup page, after selecting and saving the Bacnet utility, click Add Devices Manually.
The Add/Edit Device pop-up is displayed. - Enter or select the following information:
Field Description Device Name* Enter the name of the device you are onboarding.
Device Id* Enter the device id of the device you are onboarding.
Device Description Enter a description of the device.
IP Address* Enter the IP Address of the device.
Port* Enter the BACnet port.
Device MAC Enter the MAC address of the device.
Device SNET Enter the Network ID of the BACnet device.
Segmentation Support Select the type of BACnet segmentation support for the device.
Vendor Id Enter the vendor identifier of the BACnet device.
Vendor Name Enter the name of the BACnet device vendor.
No Multiple Read Select this checkbox if multiple read is not supported by the BACnet device.
No Multiple Write Select this checkbox if multiple write is not supported by the BACnet device.
Max APDU Length Accepted Enter the value for Max APDU length supported by the device.
- Click Add/Edit Device.
The device is added to the table.
Discovering Devices
You can automatically discover nearby devices within the network and subsequently add them to the BACnet network. If there are multiple devices connected to the network, you can run a discovery for devices within a specific ID range. Instead of adding the devices manually, you can also search for devices within the same network.
- On the Utility Setup page, after selecting and saving the Bacnet utility, click Discover Devices.
The Submit Min/Max BACnet pop-up is displayed. - To define the range for the discovery, enter the minimum and maximum device id values.
Note: The maximum value that can be entered here is 4194302.
- Click Submit.
All the devices within the Bacnet network will be added to the table.Note: To update the list of devices in the table after discovery, click Refresh.
Editing Device Information
- On the Utility Setup page, in the table, under the Action column, click
.
The Add/Edit Device pop-up is displayed. - Update the required information. Refer Adding Devices Manually for field descriptions.
- Click Add/Edit Device.
The device information is updated.
Creating Duplicate Devices
This option is useful when you want to create devices that have most of the device attributes in common, such as the IP address and port. This often happens when a vendor has multiple devices in the network. Using this option allows you to only add the device details that are unique for this device, such as the name and the device ID.
- On the Utility Setup page, in the table, under the Action column, against the device that you want to duplicate, click
.
The Add/Edit Device pop-up is displayed with the details of the duplicated device already filled. - Update the device details as required. Refer Adding Devices Manually for field descriptions.
- Click Add/Edit Device.
The duplicate device is added to the table.
Fetching Objects
This option allows you to fetch all the objects (data points) exposed under a device.
- On the Utility Setup page, in the table, under the Action column, against the device for which you want to fetch objects, click
.
The objects are fetched automatically. - To see the fetched objects, under the Action column, click
.
The Bacnet Object Table is displayed.
Adding Objects to the Device Manually
In situations when fetching objects does not automatically update the list of objects, you can add them manually under device(s).
- On the Utility Setup page, in the table, under the Action column, against the device for which you want to add objects, click
.
The Add Object pop-up is displayed. - Enter or select the required information.
Field Description Object Name* Enter the name of the object.
Object Id* Enter the object Id.
Object Description Enter a description of the object.
Object Type* Select the type of object from the options available.
- Click Add Object.
The object is added to the device. - To view this object, under the Action column, click
.
The Bacnet Object Table displays the list of objects associated with this device.
