In this section, you will learn how to:
Monitoring water meters starts with integrating them into the Bluecoin system, ensuring they are properly configured and recognized. Once onboarded, you can track their output and performance in real time. This allows you to track water usage, identify inefficiencies, and make informed decisions for enhanced water management.
Creating a Water Meter
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Water Meters.
The Water Meters page is displayed with a list of onboarded water meters, if any. - Click Create Water Meter.
- Enter or select the required field information.
Field Description Name*
Enter the name of the water meter.
Model*
Enter the model of the water meter.
Max Volume*
Enter the maximum volume reading that the water meter can display.
Select Meter Point
Select the corresponding utility point configured during the utility device setup.
Note: For more information, refer to Managing Utility Devices.
Select Data Sync Config
Select the frequency at which data sync should be configured.
Note: For more information, refer to Configuring Data Sync.
Description
Enter a description for the water meter.
Active
Select this checkbox to activate the onboarded water meter.
- Click Save.
The water meter is onboarded.
Editing Water Meters
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Water Meters.
The Water Meters page is displayed with a list of onboarded water meters, if any. - Under the Action column of the required water meter, click
. - Edit the required information. Refer to Creating a Water Meter for field descriptions, if needed.
- Click Save.
Filtering Water Meters
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Water Meters.
The Water Meters page is displayed with a list of onboarded water meters, if any. - To filter water meters by model, enter the water meter Model.
- To filter water meters by name, enter the Name of the water meter.
- To reset the filter(s), click Reset.
Resetting Water Meters
If you notice that the readings from a water meter are incorrect or not captured properly, you have the option to reset it. Resetting the meter clears all previous readings and allows it to start recording water consumption anew. This ensures that you have accurate and reliable data moving forward.
To reset a water meter:
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Water Meters.
The Water Meters page is displayed with a list of onboarded water meters. - Under the Action column, click Reset Meter for the meter you want to reset.
- In the confirmation pop-up window, click Yes, reset it!.
The readings of the selected water meter are reset.
