Skip to content

Web Application - Admin User Manuals

Managing HVAC Zone Profiles

6 min readUpdated

In this section, you will learn how to:

Adding an HVAC Zone Profile

An Hvac profile defines the settings to be applied to an Hvac zone in the office. Creating Hvac zone profiles allows you to control an Hvac zone with predefined settings configured in the profile. For example, the Hvac zone for meeting rooms could have a different profile than cabins, or pantry and cafeteria areas.

  1. In the Main Menu, under the ADMIN OPTIONS, in the Facilities subsection, click Profiles.
    ‎The Profiles page is displayed with the Desk tab open by default.
  2. Click the Hvac Zone tab and then click Add Hvac Zone Profile.
  3. Enter or select the required field information:
    Field Description
    Hvac Zone Profile Name *

    Enter the name for the Hvac zone profile.

    Select Control Type *

    Select the option for controlling the temperatures in the HVAC zone associated with this profile.

    The following options are available:
    • Occupancy: The HVAC zone will regulate temperature based on occupancy.
    • Desk User Location or Access: The HVAC zone regulates temperature based on the desk usage in the absence of occupancy sensors. When users have fixed desks, desk usage is tracked based on the last check-in or check-out..
    • Desk Checkin: The HVAC zone will regulate temperature based on the number of check-ins.
    Week Days

    Select the required checkbox(es) for the days of the week to be marked as weekdays. This is used to define the Day Based Profile.

    BACnet Write Priority:

    Select the priority to be assigned to different HVAC controllers for the following commands:

    • Daikin Dbac Start Stop Command Priority
    • Daikin Dbac Mode Command Priority
    • Daikin Dbac Flow Rate Command Priority
    • Daikin Dbac Temp Adjust Priority
    • Daikin Dbac Direction Command Priority

    Note: BACnet priority ranges from 0 to 9, with 1 being the highest and 9 being the lowest priority.

    Controls

    Select the following controls for the HVAC unit:

    • Select States.
    • Select Modes.
    • Select Speeds.
    Allow Temperature Change Select this checkbox to allow changes in temperature in the Hvac zone with this profile.
    Min Temperature *

    Note: This field is enabled only if you select the Allow Temperature Change checkbox.

    Enter or select the minimum temperature.

    Max Temperature *

    Note: This field is enabled only if you select the Allow Temperature Change checkbox.

    Enter or select the maximum temperature.

    Allow Decimal In Temperature

    Select this checkbox to allow temperature to be added in decimals. For example, 23.5

    Select Ac Swings

    Select AC swing direction from the options available in the dropdown.

  4. Click Save Hvac Zone Profile.
    ‎The profile is saved.
  5. To go back to the previous page and see this HVAC profile added to the list of the existing Hvac profiles, click Back.
  6. To create additional profiles within an Hvac zone to further control how the temperature is maintained within a zone, click:

Creating Occupancy Based Profile

This profile allows you to regulate the temperature based on the occupancy in an Hvac zone. You can define the temperature ranges for different occupancy thresholds within a zone.

To create a profile based on occupancy:

  1. On the Profiles page, under the Hvac Zone tab, at the bottom of the page, click Add Hvac Zone Profile Level.
    ‎TheAdd/Edit HVAC Profile Level pop-up window opens.
  2. Enter or select the required field information:
    Field Description
    Occupancy Threshold (Percentage)* Enter or select an occupancy threshold value (percentage).

    For example, 20%.

    Minimum Time (in minutes) * Enter or select the minimum time (minutes) for which the zone should have the defined occupancy for it to register as having reached the occupancy threshold.

    For example, if the occupancy threshold is 20% and value here is 5 minutes, the occupancy in the zone should be at 20% for a minimum of 5 minutes for the temperature setting to be in effect.

    Temperature Enter or select the temperature for this occupancy threshold.

    For example, if you enter the temperature as 26 for occupancy threshold 20%, then once the occupancy in the Hvac zone reaches 20% (for the specified minimum time), the temperature will be set at 26 degrees.

    Meeting State

    Select the state of the meeting room to be considered for this Hvac profile.

  3. Click Save.

Once you have completed adding all occupancy threshold levels, the table is populated and the temperature in the Hvac zone with this profile is regulated as configured for the profile.

Creating Day Based Profile

This profile allows you to regulate the temperature based on the type of the day (weekday or weekend). You can set different temperatures for weekdays and weekends. You can select the days to be defined as weekdays at the time of setting up the Hvac zone profile in the Week Days field.

You can set the time duration in which the HVAC zone profile is going to be active.

To create a profile based on the days of the week:

  1. On the Profiles page, under the Hvac Zone tab, at the bottom of the page, click Add Hvac Zone Profile Schedule.
    ‎TheAdd/Edit HVAC Profile Scheduling pop-up window opens.
  2. Enter or select the required field information:
    Field Description
    Days Type * Enter or select the type of days as:
    • Weekdays
    • Weekends
    • Holidays
    Temperature Enter or select temperature for the selected day type.

    For example, if the Days Type is Weekdays and the temperature is 24, then on weekdays, the temperature in the Hvac zone with this profile will be set at 24.

    Start Time *

    Enter or select the time at which the Hvac system for this profile should start for the selected day type.

    End Time *

    Enter or select the time at which the Hvac system for this profile should stop for the selected day type.

Editing an HVAC Zone Profile

  1. In the Main Menu, under the ADMIN OPTIONS, in the Facility subsection, click Profiles.
    ‎The Profiles page is displayed with the Desk tab option open by default.
  2. Click the Hvac Zone tab.
  3. Under the Action column, click the edit  icon for the Hvac zone profile to be edited.
  4. Update the required fields. Refer to Adding an HVAC Zone Profile for field descriptions, if needed.
  5. Click Save Hvac Zone Profile.
    ‎The Hvac zone profile is updated.

Deleting an HVAC Zone Profile

Note: An Hvac zone profile CANNOT be deleted if it is associated with a Hvac zone(s).

You can delete an Hvac zone profile if it is no longer required. However, you must ensure that no Hvac zones are associated with it. If there are Hvac zones associated with this profile, you need to first assign other profiles to these Hvac zones and then delete this profile.

To delete an Hvac zone profile:

  1. In the Main Menu, under the ADMIN OPTIONS, in the Facility subsection, click Profiles.
    ‎The Profiles page is displayed with the Desk tab option open by default.
  2. Click the Hvac Zone tab.
  3. Under the Action column, click the delete  icon for the Hvac zone profile to be deleted.
  4. In the confirmation pop-up, click Yes, delete it.
    ‎The Hvac zone profile is deleted.

 

Was this page helpful?