In this section, you will learn how to:
AHUs or Air Handling Units are critical components of HVAC systems that regulate and circulate air in buildings. They condition and distribute air by filtering, heating, cooling, or humidifying it before delivering it to indoor spaces.
Monitoring AHU systems allows you to track temperature, humidity, and airflow. This real-time data can help in early detection of issues, thus helping reduce downtime, lower energy costs, and improve comfort in indoor environments.
Creating an AHU
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click AHU.
The AHU page is displayed with a list of onboarded AHUs, if any. - Click Create AHU.
- Enter or select the required field information.
Field Description Name*
Enter the name of the AHU system.
Model*
Enter the model of the AHU system.
Select AHU Point*
Select the corresponding utility point configured during the utility device setup.
Note: For more information, refer to Managing Utility Devices.
Select Data Sync Config
Select the frequency at which data sync should be configured.
Note: For more information, refer to Configuring Data Sync.
Description
Enter a description for the AHU system.
Capacity
Select the capacity or the airflow volume of the AHU system in cubic feet per minute (CFM).
Pressure
Select the pressure that the AHU system can handle in pascals.
Active
Select this checkbox to activate the onboarded AHU system.
- Click Save.
The AHU system is onboarded.
Editing an AHU
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click AHU.
The AHU page is displayed with a list of onboarded AHUs, if any. - Under the Action column of the required AHU, click
. - Edit the required information. Refer to Creating an AHU for field descriptions, if needed.
- Click Save.
Filtering AHUs
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click AHU.
The AHU page is displayed with a list of onboarded AHUs, if any. - To filter AHU by model, enter the AHU Model.
- To filter AHU by name, enter the Name of the AHU.
- To reset the filter, click Reset.
