Skip to content

Web Application - Admin User Manuals

Managing Tasks

7 min readUpdated

In this section, you will learn how to:

Insight Tasks are essentially rules designed to detect and respond to anomalies or specific conditions. Each task defines a set of criteria or conditions that the system continuously monitors. When these predefined conditions are met—or something deviates from the expected behaviour — an alert is automatically triggered. This ensures that timely action is taken in response to potential issues or opportunities.

Note: Once a task is created, it cannot be deleted. However, you can edit a task as required.

To access the Task tab:

  1. In the Main menu, under the ADMIN OPTIONS, in the Insight subsection, click Configuration.
    ‎The Insight Configuration page opens with the Task Category tab selected by default displaying existing task categories.
  2. Click the Task tab.
    ‎The following information is displayed.

    Toolbar Options

    Name

    Allows you to filter the tasks by name.

    Active

    Allows you to filter active or inactive tasks.

    Task Category

    Allows you to filter tasks by the task category.

    Add Task

    Allows you to add a task.

    Reset

    Allows you to reset the Name, Active, and Task Category filters and display all tasks.

    Table Fields

    Name

    Displays the name of the task.

    Task Category

    Displays the name of the task category to which the task belongs. For more information on task categories, refer to Managing Task Categories.

    Calendar Schedule

    Displays the calendar schedule that defines how often the system should check for the Insight event.

    Alert Communication Schedule

    Displays the alert communication schedule which defines the frequency at which the system checks if a new communication needs to be sent.

    Min. Communication Gap

    Displays the minimum time interval between two communications triggered due to the task.

    Last Notified Email Time

    Displays the date and time at which the last notification was sent.

    Active

    Displays whether the task is active or not.

    Action

    Allows you to edit the task.

Adding a Task

When adding a task, you first need to enter the required configuration details, such as general settings, categorization, alert preferences, and notification rules. Once these initial details are provided, you can add data states that allow you to define and record specific historic conditions or data states of various systems within your facility to support long term performance analysis.

For instance, you may want to capture instances when the HVAC system reports air conditioning temperatures outside the normal range. By assigning indexes to such state schema variables, the system can log events where the temperature was either above or below the expected threshold. These occurrences are recorded as distinct data states, enabling accurate tracking and analysis of performance trends over time.

  1. In the Main menu, under the ADMIN OPTIONS, in the Insight subsection, click Configuration.
    ‎The Insight Configuration page opens with the Task Category tab selected by default displaying existing task categories.
  2. Click the Task tab.
  3. To add a task, click Add Task.
  4. Enter or select the required field information.

    Field

    Description

    Name*

    Enter a name for the task.

    Task Category*

    Select a task category under which this task should be grouped.

    Minimum Communication Gap (in mins.) *

    Enter the minimum time interval between two communications triggered by any alert events under this task. For example, if an alert is triggered and a communication is sent, this setting ensures that the system waits the defined duration before sending another message for the same open event. This helps prevent repeated notifications in a short period of time.

    Alert Communication Schedule*

    Select the frequency at which the system should check if a new communication needs to be sent. For example, if this is set to 2, the system will check every 2 minutes for an active event and verify if the minimum communication gap has passed since the last message. If both conditions are met, a new communication is triggered.

    Calendar Schedule*

    Select the calendar schedule to define how often the system should check for the Insight event.

    Note: For more information on calendar schedules, click here.

    Repeat Weight (in%)

    Enter a value (in %) to assign additional weight to recurring or unresolved events. This helps highlight long-running issues that remain unaddressed over time.

    When the system performs its scheduled checks and finds that a previously detected event is still unresolved, the score for that event increases based on the repeat weight you specify here.

    A low value (e.g., 1%) causes minimal score increase, even if the event persists across multiple checks.

    A high value (e.g., 100%) significantly increases the score with each check (e.g., from 1 to 2 to 3), making the issue more prominent on the dashboard.

    Use this setting to give greater visibility to persistent problems and help prioritize their resolution.

    Email To

    Enter the email address of the user(s) to whom the notification email should be sent.

    Email CC

    Enter the email address of the user(s) to be copied in the notification email.

    Mobile Number

    Enter the mobile number of the user(s) to be notified through a text message.

    Min. Consecutive Failed Alert

    Enter the minimum number of consecutive failure events required before an alert is sent.

    For example, if you set this value to 2, an alert will be triggered only after the system detects two back-to-back failure events.

    Min. Consecutive Resolved Alert

    Enter the minimum number of consecutive successful checks required to consider an event resolved.

    For example, if you set this value to 2, the event will be marked as resolved only after the system reports normal functioning for two consecutive checks.

    Alert Message

    Enter the alert message to be sent in the notification.

    Last Notified Email Time

    Displays the time at which the last email notification was sent.

    Note: This field is displayed only after you have saved the unit.

    State Schema

    Select the state schema to be considered for this rule. For more information on State Schemas, click here.

    Active

    Select this checkbox to activate this rule.

  5. Click Add Data States.
  6. Click Save Task.

Adding Data States

Data states allow you to define and record specific historic conditions or data states of various systems within your facility to support long term performance analysis. For instance, you may want to capture instances when the HVAC system reports air conditioning temperatures outside the normal range. By assigning indexes to such state schema variables, the system can log events where the temperature was either above or below the expected threshold. These occurrences are recorded as distinct data states, enabling accurate tracking and analysis of performance trends over time.

  1. Under Add/Edit Data States, enter or select the following information.

    Field

    Description

    Index*

    Select the State Value Index as defined in the state schema rule used for this task ensuring it matches the index of the corresponding state schema variable.

    Data Type*

    Select the type of data to be captured from this data point.

    Label *

    Enter a label for this data state.

    Unit

    Enter the unit for this data.

  2. Click Add Data State.
    ‎The data state is added to the table.
  3. Repeat steps 1 and 2 to add more data states.
  4. Once you have added all data states, click Save Task.
  5. To edit a data state, modify any of the fields in the data states table and click Save Task.
  6. To delete a data state, under the Action column, click the delete Delete icon icon.

Editing a Task

  1. In the Main menu, under the ADMIN OPTIONS, in the Insight subsection, click Configuration.
    ‎The Insight Configuration page opens with the Task Category tab selected by default displaying existing task categories.
  2. Click the Task tab.
  3. Under the Action column, click the edit Edit icon icon.
  4. Edit the fields as required. Refer Adding a Task for field information.

Filtering Tasks

  1. In the Main menu, under the ADMIN OPTIONS, in the Insight subsection, click Configuration.
    ‎The Insight Configuration page opens with the Task Category tab selected by default displaying existing task categories.
  2. Click the Task tab.
  3. To filter tasks by name, type a name in the Name field.
  4. To filter tasks by their status as active or inactive, select the required option in the Active dropdown.
  5. To filter tasks by category, select the required Task Category.
  6. To reset the filters, click Reset.
    ‎All filters are removed, and the page displays all tasks.
Was this page helpful?