In this section, you will learn how to:
Monitoring energy meters starts with integrating them into the Bluecoin system, ensuring they are properly configured and recognized. Once onboarded, you can monitor their output and performance in real time. This allows for effective tracking of energy usage, identification of inefficiencies, and informed decision-making to enhance overall energy management
Creating an Energy Meter
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Energy Meters.
The Energy Meters page is displayed with a list of onboarded energy meters, if any. - Click Create Energy Meter.
- Enter or select the required field information.
Field Description Name*
Enter the name of the energy meter. For example, AHU-4F
Model*
Enter the model of the energy meter.
Phase*
Select if it is a 1-phase or 3-phase energy meter.
Max Kwh*
Enter the maximum Kwh reading that the energy meter can display.
Select Meter Point
Select the corresponding utility point configured during utility device setup.
Note: For more information, refer to Managing Utility Devices.
Select Data Sync Config
Select the frequency at which data sync should be configured.
Note: For more information, refer to Configuring Data Sync.
Description
Enter a description for the energy meter.
Cost*
Select the calculation method for the energy meter’s cost output.
Active
Select this checkbox to activate the onboarded energy meter.
- Click Save.
The energy meter is onboarded.
Editing Energy Meters
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Energy Meters.
The Energy Meters page is displayed with a list of onboarded energy meters. - Under the Action column of the required energy meter, click
. - Edit the required information. Refer to Creating an Energy Meter for field descriptions, if needed.
- Click Save.
Filtering Energy Meters
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Energy Meters.
The Energy Meters page is displayed with a list of onboarded energy meters, if any. - To filter energy meters by phase, select the required option from the Select Phase dropdown.
- To filter energy meters by model, enter the energy meter Model.
- To filter energy meters by name, enter the Name of the energy meter.
- To reset the filter(s), click Reset.
Resetting Energy Meters
If you notice that the readings from an energy meter are incorrect or not captured properly, you have the option to reset it. Resetting the meter clears all previous readings and allows it to start recording energy consumption anew. This ensures that you have accurate and reliable data moving forward.
To reset an energy meter:
- In the Main Menu, under the ADMIN OPTIONS, in the Monitoring subsection, click Energy Meters.
The Energy Meters page is displayed with a list of onboarded energy meters. - Under the Action column, click Reset Meter for the meter you want to reset.
- In the confirmation pop-up window, click Yes, reset it!.
The readings of the selected energy meter are reset.
