In this section, you will learn how to:
Adding a Scene
Scenes are predefined lighting settings that can be configured for each zone or area on a floor. For instance, if you want certain lights to be dimmed during a presentation, you can create a "Presentation" scene to set dim lighting using the Scenes functionality. This eliminates the need to reconfigure the lighting for every meeting.
To add a scene:
- In the Main menu, under the ADMIN OPTIONS, in the Facility subsection, click Settings.
The Facility Settings page is displayed. - In the left navigation pane, under your campus, select a building.
- Select the floor and click Spaces.
The Spaces page is displayed with the Desks tab open by default. - Click Lighting Zones tab.
A list of configured lighting zones is displayed. - Add a lighting zone.
OR
For the lighting zone to which you want to add the scene, under the Action column, click the edit
icon. - Scroll down to the Scenes tab.
Note: The Only Active toggle is enabled by default, displaying only the active scenes, if any. To display all scenes (including the ones that are not active), turn off the toggle.
- Click Add Scene.
The Add/Edit Scene pop-up is displayed. - Enter the required field information.
Field Description Scene Name* Enter the name of the scene.
Set Value Set a dim value of the lights for the scene. You can adjust these values only if the Light Grouping option is enabled. This value is in terms of percentage, where 0 represents the light being off and 100 represents the light being fully lit.
Note: This field is not displayed if the Allow Light Grouping checkbox is selected at the time of adding the lighting zone as grouping causes all lights within the zone to function as a single entity, preventing configuration of individual dim values.
Sort Order Select the level of the scene.
UID Enter a UID for the scene for mapping the scene with the LMS system.
Scene Description Enter a description for the scene.
Light Zone Scene Template Select the light zone scene template to be mapped to this scene. Active Select this checkbox to make the scene available.
Hidden Select this checkbox to keep the scene hidden on the control screen.
Occupancy Mode Select the occupancy mode to be associated with the scene as:
- Occupancy Scene: This option is hidden for the user but is triggered when the Occupancy Mode option is selected.
- Unoccupancy Scene: This option is hidden for the user but is triggered when the Unoccupancy Mode option is selected.
- Occupancy Mode: Select this option to turn the lights on based on the occupancy of the zone.
- Unoccupancy Mode: Select this option to turn the lights on based on the unoccupancy of the zone.
- Vacancy Mode: Select this option to manually turn on lights as needed but enable automatic turn off after the room is vacant.
Note: This is applicable only when adding scenes for lighting zones with Lutron devices.
- Click Save Scene.
The new scene is added to the table under the Scenes tab.
Adding a Floor Scene
The lighting control system in a facility is typically managed either area wise or zone wise. However with floor scenes you can control the lighting for the entire floor with a single action. This feature is specific to Lutron lighting systems. By adding a floor-level button to the light controls, you can activate a scene that applies to the entire floor.
For example, you can create a floor scene to turn off all lights on a floor at the end of the day, eliminating the need to switch off each zone individually. You can also have a “welcome mode” floor scene that turns on all lobby and common area lights for office opening hours.
To add a floor scene:
- In the Main menu, under the ADMIN OPTIONS, in the Facility subsection, click Settings.
The Facility Settings page is displayed. - In the left navigation pane, under your campus, select a building.
- Select the floor and click Spaces.
The Spaces page is displayed with the Desks tab open by default. - Click the Lighting Zones tab.
A list of configured lighting zones is displayed. - Click Floor Scene.
The Floor Scene pop-up is displayed. - Enter the Name* of the floor scene. For example, All Lights Off.
- In the UID field, enter the corresponding UID for this action from the Lutron system.
- Select the Active checkbox to activate the floor scene.
- Click Add Floor Scene.
The floor scene is added and displayed in the table. This scene is also displayed on the Light Controls page. - To edit the scene, edit the Name or UID in the table and under the Action column, click Save.
- Repeat steps 6 to 9 to add more floor scenes.
- To close the pop-up, click Close.
Editing Scenes
- In the Main menu, under the ADMIN OPTIONS, in the Facility subsection, click Settings.
The Facility Settings page is displayed. - In the left navigation pane, under your campus, select a building.
- Select the floor and click Spaces.
The Spaces page is displayed with the Desks tab open by default. - Click Lighting Zones tab.
A list of configured lighting zones is displayed. - Under the Action column, for the lighting zone where you edit the scene, click the edit
icon. - Scroll down to the Scenes tab.
Note: The Only Active toggle is enabled by default, displaying only the active scenes. To display all scenes (including the ones that are not active), turn off the toggle.
- Under the Action column, click the
icon.
The Add/Edit Scene pop-up is displayed. - Edit the required fields. Refer Adding a Scene for field description, if needed.
- Click Save Scene.
The scene is updated.
Adding Lights
There are various methods to add lights to the application. You can either add lights through the BACnet service or directly by adding the processor/controller on the Device Setup page. For further details, refer to the Device Setup section.

