Skip to content

Web Application - Admin User Manuals

Managing Light Controls

11 min readUpdated

In this section, you will learn how to:

Controlling the lighting system involves regulating their brightness and colour temperature for optimal visibility and ambience. Configuring manual overrides for pre-defined light settings allows you to further improve energy efficiency and user comfort. Adaptive lighting settings also help enhance productivity and reduce operational costs.

The control options available for a light zone are fetched directly from the light controller. These may differ depending on the type of lights installed in that zone. For example, a certain light zone may have scenes added, another may have white tuneable lights, or a zone may have simple On/Off lights.

Configuring Light Controls

  1. In the Main Menu, under Admin Options, in the Controls subsection, click Lights.
    ‎The Light Controls page is displayed. The right pane displays the following information about the lights:
    • On: Displays the number of zones that are turned ON.
    • Off: Displays the number of zones that are turned OFF.
    • Not available: Displays the number of zones for which no data is available.
  2. From the Select Floor field in the left pane, select the floor for which you want to set the light controls.
    The corresponding lighting floor plan showing the centroids of each light zone is displayed.
  3. In the right pane, click Show Actual to see the entire light zone area.
    You can also hover your mouse over a light zone to see the details.

    Note: For the floor plan to display the different light zones, they must have been configured using the Drawing Tool feature.

  4. To select a light zone, click the select element icon Select icon and then click the light zone you want to control.
    A blue dotted rectangle is displayed around the selected light zone.
    OR
    ‎In the left pane, under Control, select the required light zone. You can select as many light zones at a time as required. However, the control options will vary depending on the number of light zones selected.
  5. To unselect a zone, click on the zone in the left pane.
  6. To unselect all zones, click the  icon.
  7. To define the controls, select the required lighting zone(s) and then click Control in the left pane.
    The control window for the selected zone(s) displays only the controls that are common for all the lights installed in all these zones or those mapped to a common template.

    Note: The Occupancy Setting option is specific to Lutron lighting systems and will be displayed in the Control window only if the setting has been enabled in the profile associated with the lighting zone.

  8. Select the required Occupancy Setting to be applied to the light schedule.

 

Managing Scenes

Note: This feature is applicable only to Lutron lighting systems.

Applying a Scene

Once a scene is applied to a lighting zone, the system automatically retrieves the current status and settings of the lights and updates the lighting parameters on the UI. This ensures that the user can visually confirm that the selected scene has been applied correctly.

For example, if you apply a “Meeting Mode” scene, the system updates the UI to show the corresponding light levels—such as 80% brightness for main lights and 50% for wall lights. These updates help verify that the lighting configuration on the floor or in the room matches the intended scene settings.

  1. In the Main Menu, under ADMIN OPTIONS, in the Controls subsection, click Lights.
    The Light Controls page is displayed.
  2. In the left pane, select the floor(s) where the scene is to be enabled.
  3. Select the required lighting zone(s) and then click Control in the left pane.
    The control window for the selected zone(s) is displayed.
  4. Select the scene to be enabled and click Apply.
    The scene is enabled and the lighting parameters are adjusted in the UI accordingly.

Editing a Scene

Note: This feature is specific to Lutron lighting systems.

Each scene defines how the lights should behave, including parameters such as intensity, dim level, and other settings that control the lighting effect. You can modify the settings for the scenes from the Light Controls page.

  1. In the Main Menu, under ADMIN OPTIONS, in the Controls subsection, click Lights.
    The Light Controls page is displayed.
  2. In the left pane, select the floor(s) where the scene is to be enabled.
  3. Select the required lighting zone(s) and then click Control in the left pane.
    The control window for the selected zone(s) is displayed.
  4. Click Edit Scene.

    Note: This option is available only when the Scene Edit Allowed option is selected in the Lighting Zone profile.

  5. In the Edit Scene pop-up, from the Scene dropdown, select the scene to be applied.
  6. Select the Zone-wise checkbox to display individual zones and and configure the following settings for each zone separately:
    • Level: Allows you to set the dim level from 0 to 100.
    • Fade Time: Allows you to set the duration (in seconds) for the new settings to gradually take effect.
    If the Zone-wise checkbox is not selected, the same settings are applied to all zones uniformly. Once a scene is edited, its most recently saved settings will be applied the next time the scene is activated.

Managing Floor Scenes

Once a floor scene has been configured in the settings, you can manage the controls with a single click of a button from the Light Controls page.

  1. In the Main Menu, under ADMIN OPTIONS, in the Controls subsection, click Lights.
    The Light Controls page is displayed. Configured floor scenes, if any, are displayed on the top right corner of the floor plan.
  2. In the left pane select the floor for which the floor scene is configured and is to be managed.
  3. In the top right corner of the floor plan, click the floor scene to be enabled.
  4. In the Confirmation pop-up, click Yes. 
    The floor scene is enabled and the lights adjust according to the settings configured in the scene.

Managing Tag Mapping

The Tag Mapping feature allows you to assign, remove, or reset existing tags for selected light zones. This helps in organizing and controlling lights more efficiently based on their assigned tags.

  1. In the Main Menu, under ADMIN OPTIONS, in the Controls subsection, click Lights.
    The Light Controls page is displayed. Configured floor scenes, if any, are displayed on the top right corner of the floor plan.
  2. In the left pane, select one or multiple light zones and click Tag Mapping.
    The Tag Mapping window is displayed.
  3. From the Action* dropdown, select one of the following actions:
    • Reset: Resets all the tags.
    • Add: Adds only the tag selected in the Select Tags field to the existing tags.
    • Remove: Removes only the tags in the Select Tags field from the existing tags.
  4. In the Select Tags field, select the required tags.

    Note: This field is marked as mandatory if you select either the Add or Remove option in the Action dropdown.

  5. Click Save.

Managing Light Schedule

This feature allows you to customize different lighting schedules for different days of the week and for different areas in your office building. You can also configure different schedules for different times within a day for the same area. You can activate or deactivate a light schedule temporarily and also manage the restricted configurations of light schedules linked to Athena systems.

To create a light schedule:

  1. In the Main Menu, under Admin Options, in the Controls subsection, click Light Schedule.
    ‎The Light Schedule page is displayed with the calendar for the current week showing the existing light schedules, if any. You can click the right and left arrows to see the schedules of the previous and next week.
    The toolbar on the top right corner displays the legend for the light schedules:
    • Only Active: This toggle allows you to display only the active light schedule (both upcoming and past) when enabled.
    • Active: All active light schedules are marked with a blue dot.
    • Inactive: All inactive light schedules are displayed with a grey dot.
    • Upcoming: All upcoming light schedules for the day are displayed with an orange dot.
    • Past: All past light schedules are displayed with a purple dot.
  2. To add a new schedule, click New Schedule.
  3. Enter or select the required field information.
    Field Description

    Name*

    Enter a name for the light schedule.

    Date Range*

    Select the date range for which the light schedule should be applicable.

    Start Time*

    Select the time at which the light schedule should be in effect.

    Repeat On Days

    Select the days on which this light schedule should repeat.

    Active

    Select this checkbox to make this light schedule active.

    Note: You can deactivate the light schedule by clicking Deactivate at the bottom of the page. The Active checkbox is automatically deselected. To activate the schedule again, select the Active checkbox or click Activate at the bottom of the page.

    Quick Control

    Select tags for spaces where you want to apply the light schedule. For example, select Meeting Room.

    Select location

    Select the location where this light schedule would be applicable.
    ‎The light zones in the selected location are displayed in the right pane.

    Select Zone

    Select the zone where this light schedule would be applicable.

  4. Click Set Control.
    • If you selected only one light zone, the Controls window displays controls applicable for lights installed in the selected light zone.
    • If you selected multiple light zones, the Controls window displays common controls applicable for all lights installed in all selected zones.
  5. Select the required Occupancy Setting to be applied to the light schedule.

    Note: The Occupancy Setting option will be displayed in the Control window, only if the setting has been enabled in the profile associated with the lighting zone

  6. To modify any scenes applied to the light schedule, click Edit Scene. For more details, click here.
  7. Click Apply.
    ‎The light schedule is saved and is added to the Light Schedule calendar.

Activating and Deactivating a Light Schedule

You can activate or deactivate a light schedule from the Light Schedule page. This feature is particularly useful when you want to temporarily turn off one or more scheduled lighting events without deleting the entire schedule.

For example, suppose you have a lighting schedule set to turn on the office lights every day at 7:00 AM for the next six months. If there’s a public holiday or maintenance day when the office will be closed, you don’t need to cancel or delete the entire recurring schedule. Instead, you can simply deactivate the schedule for that specific day with a single click. The rest of the weekly or monthly schedules will continue to run as usual.

This makes it convenient to manage exceptions without having to recreate the full schedule again later.

  1. To deactivate a schedule, on the Light Schedule page, next to the schedule you want to deactivate, click the  icon.
  2. To activate the schedule again, against the schedule, click the  icon.

Editing a Scheduled Scene

Note: This feature is specific to Lutron lighting systems.

You can adjust the settings of the different scenes applied within a lighting schedule. You can modify intensity, dim levels, and other lighting effects—to match the requirements of that time period and area. The updated scene settings are applied to the selected schedule and help ensure the lighting behaves exactly as needed throughout the day.

  1. In the Main Menu, under ADMIN OPTIONS, in the Controls subsection, click Light Schedule.
    The Light Schedule page is displayed.
  2. Create a new lighting schedule or select an existing schedule.
  3. Click Set Control in the left pane.
    The control window for the selected zone(s) is displayed.
  4. Click Edit Scene.

    Note: This option is available only when the Scene Edit Allowed option is selected in the Lighting Zone profile.

  5. In the Edit Scene pop-up, from the Scene dropdown, select the scene to be applied.
  6. Select the Zone-wise checkbox to display individual zones and and configure the following settings for each zone separately:
    • Level: Allows you to set the dim level from 0 to 100.
    • Fade Time: Allows you to set the duration (in seconds) for the new settings to gradually take effect.

    If the Zone-wise checkbox is not selected, the same settings are applied to all zones uniformly. Once a scene is edited, its most recently saved settings will be applied the next time the scene is activated.

Managing Athena Light Schedules

When a light schedule is linked to the Athena time clock sync settings, its configuration options are restricted, and you can only enable or disable the schedule.

  1. In the Main Menu, under ADMIN OPTIONS, in the Controls subsection, click Light Schedule.
    The Light Schedule page is displayed.
  2. Click the Athena schedule you want to manage.
  3. To enable the schedule, click Enable.
  4. To disable the schedule, click Disable.
  5. To test the light schedule event, click Test.
    The event is triggered manually and verifies whether it is functioning correctly.
Was this page helpful?